Detector Testing Equipment
Designed to negate the need and risk of using ladders and expensive scaffolding, No Climb detector testing equipment includes a range of telescopic and extension access poles, allowing technicians to test detectors from ground level. The access poles can be used with the range of No Climb cordless and mains powered smoke and heat dispensing heads as well as the universal removal unit. No Climb products enable competent persons to inspect and test BS 5839-1 fire alarm systems as per the requirements of legislation.
Filter and sort products
List
Grid
Designed for use with the Solo 330 smoke dispenser Delivers simulated smoke particles to the detector Supplied in a 250ml canister Non-flammable and non-toxic
This product has been discontinued
https://www.safelincs.ie/smoke-heat-co-detector-tester-equipment/
Please see our alternative products
Designed for use with the Solo 330 dispenser Introduces CO to the sensor of the detector CO concentration level below the toxic threshold Non-flammable and safe to use
Designed for use with Solo Mains Powered Heat Detector Testers Allows heat detector testers to be used at height Length of cable: 5m/16ft
Enables Solo tools to be used at high levels 1.13m long extension pole Can be used on its own or with a Solo telescopic access pole Multiple extension poles can achieve a working height of 9m
Designed for use with the Solo Cordless Heat Detector Tester
Ideal to keep as a spare or to replace an existing baton
Provides power to the cordless heat detector tester
Rechargeable via the smart fast battery charger
Provides effective protection when transporting Solo detector testing equipment Ideal for storing and carrying Solo head units, battery batons, chargers and aerosols Includes a separate bag for access poles Allows technicians to store equipment in a tidy and compact manner
Allows access to smoke, heat and CO detectors without strain Lightweight and easy to extend Available in two lengths Non-conductive glass fibre construction
Used to introduce a simulated smoke to a detector Suitable for detectors up to 100mm/4" in diameter Used with the Solo telescopic access poles for safe testing at heights Allows 360 degree view of detector LED
Single tool for detector removal, inspection and replacement Adjustable to suit the majority of smoke, CO and heat detectors Ideal for removal of detectors installed on sloping ceilings Tool remains parallel with the ceiling
Introduces simulated smoke or CO to a detector
Large cup makes it suitable for detectors up to 17.7cm/7" in diameter
For use in conjunction with Solo telescopic access poles
Suitable for functional testing of domestic alarms
Ideal entry level kit for testing smoke detectors
Available in three different working heights - 2.5m, 4m and 6m
Includes 250ml canister of Solo A3 smoke detector tester spray
Non-conductive glass fibre telescopic access and extension poles
Provides a suitable heat source for effective heat detector testing Designed for for fixed temperature, rate-of-rise and combination detectors Available in two volt versions Supplied with a 5m/16ft cable
Ideal kit for functional testing of domestic alarms
Large smoke dispenser: suitable for alarms up to 17.7cm/7"
Includes Solo A3 and C3 aerosols
Non-conductive glass fibre extension access pole
Replacement head unit for the Solo cordless heat detector tester Requires no wiring whatsoever Uses Cross Air Technology to test heat detectors Suitable for fixed temperature, rate-of-rise and combination detectors
Battery operated - supplied with 2 battery batons as standard Air is heated and directed at the detector sensor Suitable for fixed temperature, rate-of-rise and combination detectors Supplied with a fast charger to allow for all day detector testing
Includes equipment needed for the removal and testing of smoke detectors Available in two different working heights - 6m and 8.2m Supplied with Solo A3 smoke detector tester spray Universal removal tool suits the majority of detectors
Equipment for testing and removal of smoke and heat detectors in one kit Includes removal tool, smoke dispenser and 220/240V mains powered heat detector tester Designed to suit the majority of detectors Only one telescopic access pole required for all three equipment heads
Includes equipment needed for detector removal and testing Requires no mains wiring Available in two different working heights - 6m and 9.3m Suitable for use on the majority of modern detectors
Professional hand-held product for testing ionisation and optical smoke detectors Ozone and environment friendly Quick & Safe 150ml size can
Back to top